Infineon Technologies IPD50R2K0CE

Mfr. Part

IPD50R2K0CE

Manufacturer

Infineon Technologies (Cypress is part of Infineon)

Y-IC is a quality distributor for Infineon. We focus on genuine parts, fast delivery, and reliable service. You get the best products and support from our team.

Detailed Description

N-channel power MOSFET from Infineon’s CoolMOS CE class, designed for cost-effective, high-efficiency off-line power supplies

500 V class device family (IPD50R… indicates 500 V rating family)

“R2K0” denotes an RDS(on) class near 2.0 Ω (at standard test conditions for this family)

Single MOSFET in a compact power package commonly used on the primary side of SMPS

RoHS3 compliant and Pb-free

Key Features

High-voltage N-channel MOSFET for off-line designs

CoolMOS CE technology focus: low losses at a cost-effective price point

Low on-resistance class for this voltage range to help reduce conduction loss

Fast switching behavior to improve efficiency in flyback/QR topologies

Robust body diode and avalanche capability for demanding line conditions

Wide gate drive compatibility typical for Infineon HV MOSFETs

RoHS3 and halogen-free construction per manufacturer’s compliance

Key Advantages

Higher efficiency and lower heat in compact power supplies

Smaller heatsink or reduced thermal design burden thanks to low switching/conduction loss balance

Stable, proven Infineon process with strong reliability credentials

Good fit for cost-sensitive consumer and general-purpose off-line SMPS

Simplifies BOM selection for LED drivers, adapters, and auxiliary supplies

Backed by Y-IC’s vetted supply chain and technical support

Packaging

Shipping format per listing: Bulk

Device case family convention: IPD prefix indicates DPAK/TO-252-3 footprint in Infineon naming (verify exact mechanical outline in the datasheet before layout)

Materials and finishes typical for this class: epoxy-molded package with copper leadframe and matte tin plating, Pb-free and RoHS compliant

Approximate package style: surface-mount DPAK with exposed drain tab for heat spreading

Pin configuration typical for TO-252-3 N‑MOSFET

- Pin 1 Gate

- Pin 2 Drain (tab is Drain)

- Pin 3 Source

Thermal characteristics

- Large drain tab improves junction-to-case thermal path

- PCB copper area and proper vias are critical for heat dissipation

- Use thermal pads or solder void control to optimize Rth

Electrical properties overview

- High-voltage N-channel MOSFET in the 500 V family

- RDS(on) class near 2.0 Ω (family indication “R2K0”)

- Gate drive tolerance typical of HV MOSFETs; observe ±VGS limits and add a gate resistor/snubber as design needs dictate

Soldering and handling

- Suitable for standard lead-free reflow profiles for TO-252 packages

- Observe ESD precautions on the gate

- Confirm moisture sensitivity level and peak reflow conditions in the datasheet/package note

Lifecycle

Current status

- No public notice of imminent discontinuation identified for this family at the time of writing. Supply and status can change. Check with Y-IC for the latest.

Equivalent or alternative models

- Direct, pin-to-pin drop-in substitutes must be validated against the full datasheet (RDS(on), Qg, VDS, ID, package footprint, and thermal limits)

- Potential alternatives generally exist within Infineon’s 500 V CoolMOS CE DPAK family with similar RDS(on) classes, and from other major brands’ 500 V N‑channel MOSFETs in TO‑252

- Because exact matching depends on many parameters, contact our Y-IC sales/FAE team for a curated cross-reference and risk assessment for your design

Inventory note

- Indicative on-hand quantity: 10100 units subject to prior sale and final confirmation by Y-IC

Key Application Areas

Off-line flyback and quasi-resonant flyback power supplies for adapters and chargers

LED drivers for residential and commercial lighting (90–264 VAC input)

Auxiliary and standby supplies in TVs, set-top boxes, and appliances

Industrial auxiliary power rails and housekeeping supplies

General-purpose high-voltage DC/DC front-ends within the device’s SOA and thermal limits

PFC pre-regulator stages and primary switches where a 500 V MOSFET is appropriate

Datasheet

The most authoritative datasheet for IPD50R2K0CE is available on our Y-IC product page

We strongly recommend downloading the datasheet here to verify electrical limits, package drawings, and application guidance before design-in

Request for Quotation Now

Ready to buy or need pricing Fast response and competitive quotes on Y-IC

Get a Quote today for IPD50R2K0CE and secure available stock

Learn More on our product page and download the datasheet now

Limited Time Offer contact Y-IC for volume pricing, delivery options, and technical support