PHILIPS 74LVC827APW

Mfr. Part

74LVC827APW

Manufacturer

NXP Semiconductors

Y-IC is a quality distributor for NXP. We supply original NXP products and back you with fast service, reliable sourcing, and technical support.

Detailed Description

10-bit buffer and line driver with 3-state outputs. Two enable controls allow you to switch the bus in two 5-bit groups or all 10 bits together. LVC family logic runs from 1.65 V to 3.6 V and accepts 5.5 V tolerant inputs. Ideal for high-speed bus isolation and signal buffering in 1.8 V to 3.3 V systems.

Key Features

10-bit non-inverting buffer and line driver

3-state outputs for bus sharing

Two enables for flexible group control

LVC family operation from 1.65 V to 3.6 V

5.5 V tolerant inputs at any valid VCC

Fast propagation delay with low skew

Low static power, low dynamic power

Wide operating temperature support (see datasheet)

Fully RoHS compliant, lead-free package options

Key Advantages

Simple way to isolate and buffer wide data or address buses

Input tolerance up to 5.5 V helps mix 5 V logic inputs into 3.3 V systems

Two enable pins let you power-save or segment the bus quickly

High drive strength supports longer traces and multiple loads

LVC family ensures speed with low power in modern digital designs

Packaging

Type TSSOP, thin shrink small-outline

Case and vendor code TSSOP-24, vendor case reference 953

Material Molded thermoplastic, leadframe with matte tin finish, RoHS compliant

Size Body width about 4.4 mm, body length about 7.8 mm, height about 1.0 mm typical

Pin configuration 24 leads, 10 inputs, 10 outputs, 2 output enable pins, VCC, GND

Lead pitch 0.65 mm gull-wing leads for SMT

Thermal characteristics Typical junction-to-ambient thermal resistance in the 90–120 °C/W range on a standard PCB; actual values depend on layout and airflow

Electrical properties LVC supply 1.65–3.6 V; inputs 5.5 V tolerant; 3‑state outputs; typical tPD a few nanoseconds at 3.3 V; output drive capability suitable for bus loads; full limits and curves in the datasheet

Lifecycle

Status Active and widely supported

Not nearing discontinuation based on current industry data

Direct or functionally equivalent alternatives

- Nexperia 74LVC827APW TSSOP-24 (same family and package)

- Nexperia 74LVC827ADB SSOP-24

- Nexperia 74LVC827AD SOIC-24

- Texas Instruments SN74LVC827APW TSSOP-24

- Texas Instruments SN74LVC827AD SOIC-24

If you need drop-in or second-source confirmation for your exact footprint and timing, contact Y-IC sales via our website and we will match the best equivalent for your design

Key Application Areas

Microcontroller and MPU bus buffering and isolation

Address and data bus switching for memory and peripherals

Backplane and board-to-board signal driving

Level tolerant input interfacing from 5 V logic into 3.3 V domains

General-purpose glue logic in embedded systems, industrial control, networking, and consumer electronics

Datasheet

The most authoritative and up-to-date datasheet for 74LVC827APW is available on our website. Download it now from this product page to get complete electrical specs, timing, pinout, and PCB footprint guidance.

Request for Quotation Now

Ready to buy or sample 74LVC827APW

Get a Quote on our website now

Learn More by contacting our sales engineers for fast help

Limited Time Offer Check current pricing and stock while supplies last

Y-IC will provide you the best products and services, with rapid delivery and reliable sourcing.