Infineon IPA60R099P6

Mfr. Part

IPA60R099P6

Manufacturer

Cypress Semiconductor (Infineon Technologies). Y-IC is a quality distributor of Infineon products. We focus on genuine supply, competitive pricing, and fast, reliable service to help you build better systems.

Detailed Description

IPA60R099P6 is a 600 V, N‑channel superjunction power MOSFET from Infineon’s CoolMOS P6 family. It delivers low on-resistance in a compact, fully insulated TO‑220F (TO‑220 FullPAK) package. The device targets high‑efficiency, hard- and soft‑switching power stages in SMPS and lighting, combining low conduction loss with fast, well‑controlled switching and strong ruggedness. Although sometimes grouped under “ICs,” this is a discrete power MOSFET, not an integrated circuit.

Key Features

600 V N‑channel superjunction CoolMOS P6 technology

Low RDS(on) class: 0.099 Ω (typical class at VGS ≈ 10 V), reduces conduction loss

Fast, efficient switching with low charge and capacitances for higher efficiency at light and full load

Robust avalanche and dv/dt capability for reliable hard switching

Improved body-diode behavior with low reverse-recovery charge for softand hard-switch topologies

Standard gate drive compatibility (±20 V gate rating; works with common 10–12 V drivers)

Fully insulated TO‑220F package for simplified isolation and mounting

Wide operating temperature range with proven long-term reliability

Key Advantages

Higher efficiency and lower heat in PFC, LLC, and PWM stages

Easier EMI tuning due to controlled switching behavior and reduced ringing

TO‑220F’s integrated insulation often eliminates mica/silpad and shoulder washers, speeding assembly

Safe, robust operation in demanding line conditions thanks to avalanche and dv/dt ruggedness

Broad family pin‑to‑pin options enable easy performance scaling or second‑sourcing

Strong ecosystem of design resources and models from Infineon

Packaging

Type: TO‑220F (TO‑220 FullPAK), Infineon package code often referenced as 879

Material: Molded epoxy plastic body with insulated tab; copper leadframe

Insulation: Fully molded body provides electrical isolation of the tab from the heatsink

Size: Industry‑standard TO‑220F outline and hole pattern (see datasheet mechanical drawing for exact dimensions)

Pin configuration: 3 leads; Pin 1 = Gate, Pin 2 = Drain, Pin 3 = Source; internal tab connects to Drain but is externally insulated

Mounting: Through‑hole with single mounting hole; compatible with clip or screw heatsinks; thermal interface pad optional

Thermal characteristics: TO‑220F offers convenient isolation with higher thermal resistance vs. bare‑tab TO‑220; use adequate heatsinking and airflow

Electrical properties summary: VDS 600 V; RDS(on) 0.099 Ω class; gate rating ±20 V; superjunction structure for low charge and capacitance

Lifecycle

Current status: Industry‑active device within Infineon’s CoolMOS P6 portfolio based on latest market availability. Not known to be nearing discontinuation at this time.

Direct package/silicon equivalents in the same P6 family:

- IPP60R099P6 (TO‑220, non‑isolated, same RDS(on) class)

- IPB60R099P6 (D2PAK / TO‑263 SMD, same RDS(on) class)

- IPW60R099P6 (TO‑247, same RDS(on) class)

Similar P6 options in TO‑220F for alternate conduction loss trade‑offs:

- IPA60R080P6 (lower RDS(on) for lower conduction loss, higher die size)

- IPA60R125P6, IPA60R190P6 (higher RDS(on) for lower cost or lighter loads)

Newer‑generation alternatives may exist in the CoolMOS P7 family for certain topologies. For a full, up‑to‑date cross list or verified second sources, please contact Y‑IC sales via our website. We will help you select fully compatible or improved replacements.

Key Application Areas

AC‑DC SMPS primary stages: PFC boost, LLC half‑bridge, and PWM flyback/forward

TVs, monitors, set‑top boxes, adapters, chargers, and all‑in‑one supplies

LED lighting drivers and industrial lighting power supplies

Industrial and consumer power supplies from roughly 100 W to 1 kW (topology‑dependent)

Auxiliary power in drives, UPS, and server/telecom supplies where 600 V devices are required

Datasheet

Y‑IC hosts the most authoritative and current datasheet for IPA60R099P6 on our product page. We recommend downloading it here for complete electrical limits, curves, and mechanical drawings.

Request for Quotation Now

Stock is available (current internal quantity reference: 1622 units). Act now to secure supply.

Get a Quote on our website for best pricing and delivery

Learn More with our technical resources and cross‑reference support

Limited Time Offer: Contact Y‑IC today to lock in allocation and volume discounts