AMD XC17S150AVO8I

Mfr. Part

XC17S150AVO8I

Manufacturer

AMD Xilinx

Y-IC is a quality distributor for AMD Xilinx. We focus on genuine supply, fast response, and reliable after-sales support. You will get the best products and services from us.

Detailed Description

Serial configuration PROM for Xilinx FPGAs, used to store and stream the FPGA bitstream at power-up.

Memory density 1.5 Mb (150 Kb × 10, approximate capacity for older Xilinx bitstreams).

One-Time Programmable OTP device for secure, fixed configuration storage.

Supply voltage 3.0 V to 3.6 V nominal 3.3 V.

Industrial temperature range -40°C to +85°C.

Surface-mount, 8-pin small-outline package family.

RoHS status RoHS non-compliant. Typically SnPb lead finish.

Base product number XC17S150A. Ordering suffix VO8I indicates an industrial-temp 8-lead package variant. Some sources show 8-SOIC and 8-TSOP options under the same base family.

Typical use model Store the FPGA configuration image and shift it out to the FPGA using the supported Xilinx serial configuration protocol at power-on.

Current available quantity reference 2580 units pending prior sales. Contact Y-IC to confirm live stock.

Key Features

Purpose-built configuration PROM for AMD Xilinx FPGAs

1.5 Mb non-volatile memory

OTP technology for data integrity and tamper resistance

3.3 V class operation 3.0 V to 3.6 V

Industrial temp grade -40°C to +85°C

8-pin SOIC or 8-pin TSOP small footprint options

Designed for Xilinx serial configuration modes Master or Slave Serial where supported by target FPGA

Simple board integration few pins and minimal external components

Key Advantages

Deterministic and fast FPGA power-up configuration

Very small BOM and PCB area compared to parallel memories

High data security once programmed OTP cannot be altered in the field

Low risk of configuration corruption during normal operation

Industrial temperature range suits harsh environments

Long-term availability of the base family across many legacy Xilinx platforms

Easy programming using approved Xilinx programming tools or supported third-party programmers check datasheet and tool support

Packaging

Shipment format Tube

Package options 8-SOIC 0.154 in 3.90 mm body width and 8-TSOP depending on exact ordering suffix

Material Molded epoxy body with metal leadframe. Finish typically SnPb because device is RoHS non-compliant

Size profile Low-profile small-outline body improves density on PCB

Pin configuration 8 leads total. Typical signals include VCC, GND, serial clock, serial data in out, chip enable, output enable reset exact pin names and placement vary by package. Refer to the datasheet for the official pinout

Thermal characteristics Rated for -40°C to +85°C operation. Junction-to-ambient and power dissipation depend on PCB layout and airflow consult datasheet for θJA in each package

Electrical properties

- VCC 3.0 V to 3.6 V nominal 3.3 V

- Non-volatile OTP memory retains data without power

- Input levels compatible with standard 3.3 V logic families

- Detailed timing, programming voltages, and current consumption are specified in the datasheet

Lifecycle

Status Legacy family. Many XC17S variants are discontinued or NRND in modern supply chains. Availability can be limited and package codes may vary by region and date code

Recommendation Check current production and inventory status with Y-IC. We actively source legacy AMD Xilinx components and can support last-time-buy and strategic stock

Potential alternatives verify functional and bitstream compatibility before use

- AMD Xilinx XC18V series in-system programmable PROMs for applicable FPGA families example XC18V01 XC18V02 capacities vary

- AMD Xilinx Platform Flash XCFxxS XCFxxP families example XCF01S XCF02S for later Spartan Virtex families

- Microchip Atmel AT17 series configuration memories example AT17C AT17LV AT17F families

- Note Pinouts, voltage, density, and configuration format compatibility differ across families. Always cross-check with your target FPGA datasheet and the memory’s programming format. If you do not see a drop-in alternative here, please contact Y-IC via our website for a tailored cross-reference

Key Application Areas

Boot configuration storage for AMD Xilinx FPGAs in legacy designs

Industrial control and factory automation PLCs motor control HMI

Telecommunications and networking equipment legacy line cards, CPE, baseband modules

Test and measurement instruments data acquisition and signal processing units

Embedded systems that need fixed, secure FPGA configuration and quick boot

Defense and aerospace legacy platforms subject to program sustainment where leaded parts are required

Datasheet

Y-IC hosts the most authoritative datasheet for XC17S150AVO8I on our product page obtained from the official manufacturer source. For accurate pinouts, timing specs, and programming procedures, download the datasheet directly from this page

Request for Quotation Now

Ready to buy or need volume pricing Get a Quote on Y-IC now

Limited Time Offer competitive pricing for legacy AMD Xilinx parts while stock lasts

Learn More talk to our experts for cross-reference support and lifecycle planning

Act now availability is limited for legacy PROMs. Visit Y-IC, click Get a Quote, and secure your allocation today