P-DUKE FEC30-24D12

Mfr. Part

FEC30-24D12

Manufacturer

P-DUKE Technology, Inc. — Y-IC is a quality distributor for P-DUKE. We deliver genuine parts, fast lead times, and dependable service.

Detailed Description

Isolated DC-DC power module, FEC30 series, nominal 30 W class. Designed for 24 VDC bus systems with dual 12 V regulated outputs (typically ±12 V). Wide input range for 24 V systems, compact 2 x 1 inch industry footprint, through‑hole pins. Ideal where clean, isolated rails and robust protections are needed. Category: Integrated Circuits (ICs) > Specialized ICs.

Key Features

Wide input range for 24 V systems (commonly 9–36 V or 18–36 V depending on sub‑version)

Dual 12 V regulated outputs for split rail or dual‑load designs

Full isolation between input and output for noise and ground‑loop control

High efficiency power conversion in a compact 2 x 1 inch module

Built‑in protections: input under‑voltage lockout, output over‑current/short‑circuit, over‑temperature (series‑typical)

Tight line/load regulation with low ripple and noise (series‑typical)

Remote on/off control pin available on many FEC30 variants

Convection‑cooled operation across a wide ambient temperature range (series‑typical)

Meets common safety and EMC practices for DC‑DC modules when used per datasheet

Key Advantages

Space saver: delivers 30 W in a standard 2 x 1 inch footprint

System friendly: isolated outputs reduce interference and ground issues

Reliable power: designed for continuous operation with protective features

Design flexibility: dual 12 V rails support ±12 V analog and mixed‑signal loads

Fast integration: industry‑standard pinout eases drop‑in replacement

Packaging

Type: Encapsulated isolated DC‑DC converter module, through‑hole

Mechanical size: Industry‑standard 2 x 1 inch footprint (approx. 50.8 x 25.4 mm), low profile; confirm exact outline in datasheet

Case material: Encapsulated case for thermal and environmental robustness (series‑typical)

Pin configuration: Standard 2 x 1 DC‑DC pinout; dual‑output variant typically includes +Vout, −Vout, COM, +Vin, −Vin, remote on/off; confirm pin map in datasheet

Thermal characteristics: Convection cooling; wide operating temperature range with output derating at high ambient or low airflow (series‑typical). Baseplate options may be available on some variants.

Electrical properties: Isolated input/output, dual 12 V regulated outputs, nominal 30 W; wide input range for 24 V systems; low ripple/noise; protections as listed above. Verify exact input window, isolation rating, regulation, ripple, and transient response in the datasheet.

Handling and shipment: ESD‑safe packing, tray or tube depending on lot. Package/Case code on this listing: 607. Date code available: 1247+. Contact us to confirm mechanical drawing and packing method before placing orders.

Lifecycle

Current lifecycle status for FEC30-24D12 is not publicly confirmed here. It is not flagged as near end‑of‑life on this page.

Direct equivalents or alternates: The closest drop‑in options are typically other 30 W, 2 x 1 inch, isolated DC‑DC modules with a 24 V‑nominal wide input range and dual 12 V outputs. Within P‑DUKE, alternatives may include other FEC30 dual‑output part numbers or sister series with the same footprint and I/O specs.

Because fit, form, and function vary by isolation rating, control pin, protection set, and pinout, please contact our sales team via the Y‑IC website with your exact input range, required output currents, isolation level, and mechanical constraints. We will propose vetted drop‑in or near‑drop‑in substitutes from P‑DUKE or cross‑brands.

Key Application Areas

Industrial control and factory automation on 24 VDC buses

PLC I/O, sensors, relays, and instrumentation needing isolated rails

Telecom and networking equipment power stages

Transportation and in‑vehicle electronics with 24 V systems

Test and measurement, data acquisition, and mixed‑signal boards

Building automation, security, and access control controllers

Energy and power systems auxiliary supplies (gate drives, monitoring)

Datasheet

Y‑IC hosts the most authoritative datasheet for FEC30-24D12 on this product page. For exact electrical limits, pinout, mechanical drawing, isolation voltage, efficiency curves, thermal derating, and safety notes, download the datasheet now from our site.

Request for Quotation Now

Stock available quantity: 3000 units (subject to prior sale). Get a Quote on Y‑IC now for best pricing and lead time. Limited Time Offer — secure your allocation today. Have questions? Learn More on the product page or chat with our sales team for fast support.