Texas Instruments SN74LVC3G04YZAR

Mfr. Part

SN74LVC3G04YZAR

Manufacturer

Luminary Micro/Texas Instruments. Y-IC is a quality distributor of Texas Instruments brand products. We deliver genuine parts, fast service, and the best customer support.

Detailed Description

Triple inverter gate IC in ultra-small 8-DSBGA (1.9 x 0.9 mm) for space-constrained designs. Operates across 1.65 V to 5.5 V. Three independent inverters with strong drive (±32 mA) and fast switching. Wide temperature range from -40°C to 125°C. Surface-mount, tape-and-reel packaging. RoHS3 compliant.

Key Features

Logic type: Inverter (3 channels, 3 inputs, 3 outputs)

Supply voltage range: 1.65 V to 5.5 V

Output drive: 32 mA source/sink per channel

Low-power LVC family; very low quiescent current (typ. µA-level)

Fast propagation delay: about 3.2 ns at 5 V, 50 pF load

Wide operating temperature: -40°C to +125°C

5.5 V tolerant inputs and Ioff support for partial power-down (typical for LVC family)

Series: 74LVC

Mounting: Surface mount

Compliance: RoHS3

Key Advantages

Saves PCB space with tiny 8-DSBGA footprint

Works across common logic rails from 1.8 V to 5 V systems

Strong drive strength for buffering and signal inversion with capacitive loads

Low power consumption extends battery life

Fast edges improve timing margins in high-speed digital paths

Robust LVC family behavior for mixed-voltage logic and partial power-down scenarios

Packaging

Type: 8-DSBGA (Die-Size Ball Grid Array), also referenced as 8-XFBGA/DSBGA

Size: 1.9 mm x 0.9 mm nominal footprint

Material: Wafer-level chip-scale package with solder balls (typ. SnAgCu). Mold-compound-free die-level encapsulation

Pin/ball configuration: 8-ball grid with 3 inputs, 3 outputs, VCC, GND (compact 4x2 array)

Mounting: Surface mount, tape & reel (TR)

Thermal characteristics: Very small thermal mass; heat dissipates primarily through PCB. Follow TI layout and derating guidance for small WLCSP/DSBGA packages. Operates -40°C to +125°C ambient

Electrical properties: Wide VCC (1.65–5.5 V), ±32 mA output drive, low ICC in µA range, fast propagation delay, CMOS/LVC input thresholds (approx. VIH 1.7–2.0 V and VIL 0.7–0.8 V depending on VCC). Note: The device is designed for standard LVC logic levels; consult datasheet for exact threshold tables versus VCC

Lifecycle

Status: Active and widely available. Not near discontinuation

Equivalent/alternative models (same function in other packages):

- Texas Instruments SN74LVC3G04 in VSSOP-8 (DCU) and SC70-8 (DCK) variants

- Nexperia 74LVC3G04 in comparable 8-pin packages

- onsemi MC74LVC3G04 in similar 8-pin packages

If you need drop-in or footprint-compatible alternatives for 8-DSBGA, or detailed cross-references, please contact our sales team via the Y-IC website for tailored guidance

Key Application Areas

Signal inversion and logic conditioning in MCU/FPGA designs

Level interfacing across 1.8 V, 3.3 V, and 5 V logic rails

Clock and control signal inversion for timing and enable lines

LED driving and simple buffering where inversion is required

Portable and wearables, IoT nodes, and sensor modules needing ultra-small logic

High-density boards in smartphones, tablets, and compact consumer electronics

Datasheet

Y-IC provides the most authoritative datasheet for SN74LVC3G04YZAR on our product page. We recommend downloading it now for exact electrical characteristics, ball maps, and layout guidance.

Request for Quotation Now

In stock: 2637 units. Get a Quote on Y-IC now. Learn More and lock in pricing with our Limited Time Offer. Our team is ready to help you with selection, logistics, and technical support.