LINEAR LTC1060ACN

Mfr. Part

LTC1060ACN

Manufacturer

Linear Technology / Analog Devices

Y-IC is a quality distributor for Analog Devices (Linear Technology). We stand behind this brand and will deliver the best products and services to you.

Detailed Description

LTC1060ACN is a dual universal switched-capacitor filter IC. Each section can be configured as lowpass, highpass, bandpass, or notch. The filter frequency is set by an external clock, making it easy to tune and reconfigure without precision resistors or inductors. Grade “A” (ACN) offers tighter accuracy. DIP package for through-hole designs.

Key Features

Dual 2nd‑order universal filter sections (independent or cascade)

Clock‑tunable cutoff/center frequency for easy design changes

Multiple responses: lowpass, highpass, bandpass, notch

Integrated op amps and on‑chip precision capacitors

High accuracy “A” grade selection

Single‑supply or dual‑supply operation (consult datasheet for exact limits)

Low power CMOS switched‑capacitor architecture

Simple external component count; no inductors needed

Through‑hole DIP for fast prototyping and robust assembly

Key Advantages

Fast design and reconfiguration by changing clock frequency

Stable, repeatable filter performance with minimal external parts

Space and cost savings versus discrete active filters

Ideal for legacy and maintenance environments needing DIP form factor

Better tolerance control with “A” grade

Reduced time‑to‑market for custom filter responses

Packaging

Type: Through‑hole DIP (PDIP), 16‑lead

Material: Molded epoxy plastic body, tin‑plated leads

Size: Standard 0.3 inch (7.62 mm) body width; length about 19.3 mm; 2.54 mm lead pitch

Pin configuration: 16 pins including two filter section I/O pins, clock input pins, V+ and V− (or VCC/GND for single‑supply), and ground; refer to datasheet for exact pinout

Thermal characteristics: Typical θJA ~90–100 °C/W in still air; operating temperature range (commercial CN): 0°C to +70°C; storage: −65°C to +150°C

Electrical properties (summary): Clock‑tunable filter frequency; supports single or dual supplies; on‑chip capacitors set filter accuracy; consult datasheet for supply voltage range, input/output levels, noise, and THD

Package / Case code: 1299 (manufacturer code)

Package: DIP

Stock availability: 2192 units ready to ship

Lifecycle

Status: Mature Linear Technology device supported by Analog Devices; widely used in legacy and industrial designs. As of the latest public information, not announced for end‑of‑life.

Equivalents / Alternatives (verify pinout and specs before use):

- LTC1060CN (same function, non‑A grade, DIP)

- LTC1061ACN (related dual universal filter family, DIP)

- MF10CN (Texas Instruments/National, dual universal switched‑capacitor filter, DIP)

- SOIC variants of LTC1060 may be available if you prefer SMD packaging

If you need a drop‑in replacement or custom guidance, please contact our sales team via our website for the latest lifecycle status and vetted alternatives.

Key Application Areas

Audio filtering (tone control, equalization, noise reduction)

Anti‑aliasing and reconstruction filters for ADC/DAC

Instrumentation and test equipment signal conditioning

Communications IF/baseband filtering

Biomedical and sensor processing (ECG/EEG, vibration, pressure)

Industrial control and data acquisition

Notch filters for hum/band interference removal

Programmable filter modules and education/training labs

Datasheet

Our website hosts the most authoritative datasheet for LTC1060ACN. For accurate electrical limits, pinout, and design examples, download the datasheet on this page now.

Request for Quotation Now

Get a Quote today on our website. Learn More and secure your pricing with our Limited Time Offer. Our team is ready to support your design and supply needs.