NXP USA Inc. SPC5604CAMLL6

Mfr. Part

SPC5604CAMLL6

Manufacturer

Freescale / NXP Semiconductors

Y-IC is a quality distributor for Freescale / NXP. We focus on genuine parts, fast delivery, and professional service to ensure you get the best products and support.

Detailed Description

32-bit automotive-grade microcontroller from the MPC56xx Qorivva series. Single-core e200z0h Power Architecture CPU running up to 64 MHz. 512 KB on-chip Flash, 48 KB RAM, 64 KB EEPROM. Rich automotive connectivity: CAN, LIN, SPI, SCI/UART, I2C. 28-channel 10-bit ADC for mixed-signal control. Integrated DMA, PWM, watchdog (WDT), and power-on reset (POR). Operates from 3.0 V to 5.5 V. Internal oscillator. Wide temperature range −40°C to +125°C for harsh environments. 100-LQFP package (14 x 14 mm), surface-mount. RoHS3 compliant. Base product number SPC5604. Supplier device package: 100-LQFP (14 x 14). Available stock: 2672 units.

Key Features

CPU: 32-bit e200z0h Power Architecture, single core

Frequency: up to 64 MHz

Program memory: 512 KB Flash

Data memory: 48 KB RAM

EEPROM: 64 KB

ADC: 28 channels, 10-bit resolution

Peripherals: DMA, PWM, POR, WDT

Connectivity: CANbus, LINbus, SPI, SCI/UART, I2C

I/O pins: 79 configurable I/Os

Supply voltage: 3.0 V to 5.5 V

Oscillator: internal

Package: 100-LQFP (14 x 14 mm), surface mount

Operating temperature: −40°C to +125°C (TA)

Compliance: RoHS3

Key Advantages

Built for automotive reliability and long life in high-temperature, high-noise environments

Broad, native automotive bus support (CAN, LIN) for easy in-vehicle networking

Adequate performance at 64 MHz for body, gateway, and control tasks

Large embedded Flash and EEPROM for complex applications and data logging

28-channel ADC supports mixed-signal sensing and control

Integrated safety and housekeeping (WDT, POR) reduce external components

Wide supply range (3.0–5.5 V) simplifies power design in vehicles

Mature ecosystem in the MPC56xx Qorivva family for tooling and software

Packaging

Type: LQFP-100, plastic quad flat package

Material: epoxy-molded plastic body with copper alloy leadframe; lead-free, RoHS3 compliant

Size: 14 mm x 14 mm body; typical body thickness around standard LQFP range

Lead count and pitch: 100 leads; typical LQFP pitch around 0.5 mm (verify in datasheet)

Pin configuration: 79 user I/O pins plus power, ground, oscillator, and dedicated interface pins

Mounting: surface mount, reflow soldering

Thermal characteristics: designed for PCB heat spreading via leads and copper planes; no exposed thermal pad; follow layout and copper area guidance for best thermal performance

Electrical properties tied to package: supports 3.0–5.5 V operation; ESD and EMC behavior aligned with automotive-grade practices; check datasheet for exact limits

Shipping format: tray

Lifecycle

Status: Mature, widely used in automotive; not indicated as near end-of-life in general public information

Planning note: NXP’s newer automotive MCUs (S32 family) are available; MPC56xx remains supported for long-life programs

Equivalent or alternative models to consider:

- MPC5604C variants in 100-LQFP with different temperature grades or memory options (same core family)

- MPC5603C (similar architecture, lower Flash)

- MPC5607C (same family, higher Flash)

- MPC5604B (related family with similar performance; verify pinout and features)

- MPC5634M or MPC564x series (higher performance Power Architecture options; check compatibility)

- S32K144 or other S32K models (Arm-based, modern alternative; not drop-in compatible but suitable for new designs)

- Cross-family note: STMicroelectronics SPC5604C devices are closely related due to joint development history; some are pin-compatible in certain packages. Verify pinout, timing, and software compatibility carefully.

If you need exact drop-in equivalents, package-pin mapping, or long-term supply confirmation, contact our sales team via the Y-IC website for the latest, project-specific guidance.

Key Application Areas

Automotive body control modules (BCM) and door/body electronics

CAN/LIN gateway nodes and networked actuators

Instrument clusters and driver information systems

Motor control, pumps, fans, HVAC actuators with PWM and ADC sensing

Lighting control (exterior/interior)

Safety monitoring and watchdog-supervised subsystems

Industrial controllers needing robust CAN and mixed-signal inputs

Datasheet

Y-IC provides the most authoritative datasheet for SPC5604CAMLL6 on our product page. Download it now to get full pinout, electrical limits, timing, and layout guidance.

Request for Quotation Now

Get a Quote on Y-IC today and lock in pricing from our available stock of 2672 units

Learn More to see real-time availability and technical documents

Limited Time Offer on select inventory lots—act now for the best lead times and savings