Analog Devices Inc./Maxim Integrated MAX9993ETP+T

Mfr. Part

MAX9993ETP+T

Manufacturer

Analog Devices / Maxim Integrated. Y-IC is a quality, authorized distributor of this brand, and we will provide you with the best products and professional service from inquiry to delivery.

Detailed Description

Active RF downconverter mixer for 1.7 GHz to 2.2 GHz bands. Single mixer stage, 5 V supply, 20-pin TQFN with exposed pad. Typical gain 8.5 dB, typical noise figure 9.5 dB, optimized for cellular infrastructure and wireless local loop applications. RoHS3 compliant and supplied in tape-and-reel for automated SMT assembly.

Key Features

Frequency range: 1.7 GHz to 2.2 GHz

Mixer type: Downconverter, single mixer

Gain: 8.5 dB typical

Noise figure: 9.5 dB typical

Supply voltage: 4.75 V to 5.25 V

Supply current: ~230 mA

RF types supported: Cellular, DCS, EDGE, PCS, UMTS, WLL

Package: 20-pin TQFN/WQFN, 5 mm x 5 mm, exposed thermal pad

Mounting: Surface mount

Compliance: RoHS3

Series: MAX9993, base product family MAX999

Key Advantages

Strong receive performance in 1.7–2.2 GHz cellular bands

Active conversion gain reduces downstream IF amplifier requirements

Competitive noise figure for improved sensitivity

Compact 5 x 5 mm QFN saves PCB area

Exposed pad improves heat dissipation and RF grounding

Stable operation across standard 5 V supply range

Tape-and-reel packaging simplifies high-volume manufacturing

Packaging

Type: Tape & Reel (TR) for automated SMT pick-and-place

Component package: 20-TQFN (5 x 5) and 20-WQFN with exposed pad

Material: Molded plastic QFN on copper leadframe, matte-tin plated, lead-free

Size: 5 mm x 5 mm body, low-profile QFN; center exposed pad for thermal and ground

Pin configuration: 20 leads plus exposed pad; typical pins include RF input, LO input, differential IF outputs, VCC, bias/enable, ground; exposed pad must be soldered to ground. Refer to datasheet for exact pinout.

Thermal characteristics: Exposed pad and solid ground plane recommended; use thermal vias under pad to spread heat; good layout helps handle ~230 mA at 5 V operation

Electrical properties (summary): 4.75–5.25 V supply, ~230 mA current, 1.7–2.2 GHz operating band, 8.5 dB gain, 9.5 dB NF, single downconverter mixer

Lifecycle

Status: As of the latest available information, this product is active and not announced for discontinuation

Alternatives and equivalent models (functional, not pin-to-pin):

- Analog Devices ADL5353: Active downconverter mixer covering roughly 1500–2200 MHz, QFN package, 5 V class supply

- Analog Devices ADL5351 / ADL5350: Broadband active mixers covering 700–2700 MHz and 400–2700 MHz respectively; useful where wider band coverage is needed

- Analog Devices ADL5801: Wideband active mixer (approx. 10 MHz to 6 GHz) for flexible designs; performance differs, check gain/NF

- Maxim Integrated MAX9994ETP+T: Same family, targeted for higher bands around 2.3–2.7 GHz

- Note: These are functionally similar mixers but may differ in pinout, gain, NF, LO drive, and IF interface. Verify suitability and performance in your design.

If you need a pin-compatible or exact replacement and do not see it listed, contact our sales team via the Y-IC website for the latest lifecycle updates and tailored cross-references

Key Application Areas

Cellular base stations and remote radio heads

Small cells, repeaters, and DAS equipment

EDGE, PCS, DCS, UMTS band receivers

Wireless local loop (WLL) infrastructure

RF front-end downconversion for lab instruments and test receivers

General-purpose 1.7–2.2 GHz receiver designs

Datasheet

Y-IC hosts the most authoritative, up-to-date datasheet for MAX9993ETP+T on our product page. We recommend downloading it now to get pin assignments, detailed electrical characteristics, layout guidance, and thermal recommendations.

Request for Quotation Now

Get a Quote on Y-IC today for MAX9993ETP+T. Learn More and secure pricing and lead time. Limited Time Offer: contact us now to lock in availability and preferred terms.