Analog Devices Inc. AD8002AR-REEL

Mfr. Part

AD8002AR-REEL

Manufacturer

ADI (Analog Devices, Inc.). Y-IC is a quality distributor of ADI and we will provide you with the best products and services

Detailed Description

Dual current-feedback operational amplifier in 8-SOIC. Very wide 600 MHz bandwidth, ultra-fast 1200 V/µs slew rate, and strong 70 mA output drive per channel. Low input offset (about 2 mV) and low input bias current (about 5 µA typical). Operates on single 6–12 V supply or ±3–±6 V rails. Industrial temperature range -40°C to +85°C. Surface-mount. Base product number AD8002. Currently in stock: 7,237 pcs

Key Features

Dual current-feedback op amp (2 channels)

-3 dB bandwidth 600 MHz for wideband signals

Slew rate about 1200 V/µs for fast transients

Output current per channel up to 70 mA to drive low-impedance loads

Supply current about 10 mA per channel

Input offset voltage about 2 mV typical

Input bias current about 5 µA typical

Supply voltage span 6 V to 12 V (single supply) or ±3 V to ±6 V (dual supply)

Operating temperature -40°C to +85°C

Package 8-SOIC, narrow body (3.90 mm width)

Key Advantages

High speed with low distortion for clean video and RF signal paths

Strong drive capability for cables, filters, and ADC inputs

Current-feedback architecture gives excellent slew rate and stability over wide gains

Simple power options: single or dual supplies

Compact 8-SOIC footprint saves board space

Proven ADI reliability and performance; supported by Y-IC’s quality supply chain

Packaging

Type: 8-SOIC surface-mount integrated circuit

Material: Molded epoxy plastic body with copper leads, JEDEC-standard

Size: Body width about 3.90 mm (0.154"), length about 4.90–5.00 mm, height about 1.5 mm; lead pitch 1.27 mm

Pin configuration (typical dual op amp):

1 OUT A

2 −IN A

3 +IN A

4 V−

5 +IN B

6 −IN B

7 OUT B

8 V+

Thermal characteristics (typical for SOIC-8 on a standard PCB): θJA about 120–160 °C/W, θJC around 35–45 °C/W; observe power dissipation limits versus ambient temperature

Electrical properties relevant to package: low lead inductance suitable for high-speed operation, stable in standard reflow; ESD-protected leads

Shipment form: AD8002AR-REEL is tape-and-reel for automated assembly; bulk and cut-tape options may also be available depending on order

Lifecycle

Status: Active and in production; not nearing discontinuation based on current market information

Equivalent or alternative models to consider:

ADI same-family and close alternatives:

- AD8002ARZ, AD8002AR-REEL7, AD8002ARZ-REEL, AD8002ARMZ (MSOP-8 version)

- AD8001 (single-channel current-feedback, similar speed)

- AD8004 (quad-channel current-feedback, similar architecture)

- AD8022 (dual voltage-feedback, low distortion alternative if VFB is acceptable)

Cross-brand high-speed CF alternatives (check datasheets for exact fit):

- TI THS3202 (dual current-feedback, high bandwidth)

- TI OPA2683 (dual current-feedback)

If you need pin-for-pin or performance-optimized replacements, contact our sales team via the Y-IC website for the latest cross-reference guidance

Key Application Areas

Video distribution, cable drivers, and broadcast equipment

High-speed ADC drivers and sample-and-hold buffers

Wideband active filters and transimpedance stages

Instrumentation and test equipment needing fast settling

Imaging, CCD/CMOS sensor buffering, and RF IF stages

Telecommunications line driving and signal conditioning

Datasheet

Y-IC hosts the most authoritative datasheet for this model. We recommend downloading the AD8002AR-REEL datasheet from this page to get full specifications, pinouts, and design guidelines

Request for Quotation Now

Get a Quote on Y-IC today. Learn More about pricing and availability. Limited Time Offer – secure your 7,237 in-stock units now and accelerate your build. Our team is ready to support your design and sourcing needs