Panasonic Electronic Components EXB-N8V271JX

Mfr. Part

EXB-N8V271JX

Manufacturer

Panasonic

Y-IC is a quality distributor of Panasonic. We deliver genuine parts, fast service, and strong technical support to give you the best products and the best experience.

Detailed Description

Panasonic EXB series 4-resistor isolated array, 270 ohm per element, 0804 footprint, long-side concave terminals. Surface-mount, RoHS3 compliant. Compact 2.00 mm x 1.00 mm body with 0.55 mm max height. Tolerance ±5%, TCR ±200 ppm/°C, operating temperature -55°C to +125°C, power per resistor 31 mW. Supplier device package 0804. Base product number EXB-N8. Quantity currently available 2566.

Key Features

4 isolated resistors in one chip

270 ohm per element

0804 size for dense layouts

Concave long-side terminals for stable solder joints

±5% tolerance for general-purpose designs

±200 ppm/°C TCR for predictable drift over temperature

-55°C to +125°C operating range

31 mW per resistor power rating

Tape & Reel for automated placement

Fully RoHS3 compliant

Key Advantages

Space-saving versus four discrete resistors

Simplifies routing and reduces BOM count

Uniform electrical performance across channels

Lower assembly cost and faster SMT build

Reduced parasitics compared with wired discrete parts

Easier matching in pull-up/pull-down and multi-line signals

High reliability from Panasonic’s proven EXB series

Packaging

Shipment format Tape & Reel TR for pick-and-place machines

Device package 0804 chip array, long-side concave terminals

Body material ceramic substrate with thick-film resistive elements

Size 2.00 mm L x 1.00 mm W x 0.55 mm H max

Pin count 8 pins total, two terminals per resistor, four isolated resistors, no common node

Terminal style concave pads on the long sides for improved solder wetting and inspection

Mounting type surface mount, reflow soldering recommended

Thermal characteristics operating -55°C to +125°C, derate power at elevated temperatures

Electrical properties 270 Ω per element, ±5% tolerance, ±200 ppm/°C TCR, power per element 31 mW

Approximate limits from rated power per element current up to about 10.7 mA, voltage up to about 2.9 V (verify final limits in datasheet)

Lifecycle

Status Active and in production

Not nearing discontinuation based on current industry availability

Popular equivalent or alternative models to consider

- Bourns CRA0804-FZ-271ELF 0804, 4 isolated resistors, 270 Ω, ±5%

- Vishay CRA04P083271J 0804, 4 isolated resistors, 270 Ω, ±5%

- Yageo YC104-JR-07270RL 0804, 4 isolated resistors, 270 Ω, ±5%

- ROHM MNR14E0ABJ271 0804, 4 isolated resistors, 270 Ω, ±5%

- Samsung Electro-Mechanics RC0804FR-271 0804, 4 isolated resistors, 270 Ω, ±5% (series naming may vary)

Always check pin configuration, TCR, power rating, and height before substituting

If you need a second source or cross reference not listed, contact our sales team via the Y-IC website for tailored support

Key Application Areas

Pull-up and pull-down networks for multi-bit buses

LED current limiting for small multi-channel indicators

Line termination and biasing for digital I/O

Sensor interface arrays and signal conditioning

Multi-channel level setting in consumer electronics

Wearables, IoT nodes, smart home devices

Telecom modules and RF front-end bias networks (non-AEC)

Industrial control boards and instrumentation where tight spacing is required

Datasheet

Y-IC hosts the most authoritative datasheet for EXB-N8V271JX on our product page. Download it now to get exact ratings, soldering profiles, derating curves, and land pattern recommendations.

Request for Quotation Now

Get a Quote on Y-IC today. Learn More on the product page. Limited Time Offer for in-stock parts. Fast response, competitive pricing, and trusted Panasonic supply.