Texas Instruments SN74LVC1GU04YEPR

Mfr. Part

SN74LVC1GU04YEPR

Manufacturer

Luminary Micro/Texas Instruments

Y-IC is a quality distributor for Texas Instruments. We focus on genuine supply, fast delivery, and expert support to give you the best products and services for your project.

Detailed Description

Single unbuffered inverter, 1 channel, 1 input, 5-ball DSBGA. Ultra-small footprint for space-constrained designs. Wide supply range (1.65 V to 5.5 V), high drive (±32 mA), and fast propagation (as low as 3 ns at 5 V, 50 pF). Ideal for signal inversion, analog RC oscillators, delay networks, and general logic-level conditioning. RoHS3 compliant, surface-mount, tape-and-reel packaging. In stock quantity: 2522 units.

Key Features

Logic function: Inverter (unbuffered), 1 gate, 1 input

Series: 74LVC family

Supply voltage: 1.65 V to 5.5 V

Output drive: 32 mA source, 32 mA sink

Propagation delay: ~3 ns at 5 V, 50 pF

Operating temperature: -40°C to +125°C (extended industrial)

Package: 5-DSBGA (Die-Size Ball Grid Array), approx. 1.4 mm x 0.9 mm

Mounting: Surface mount (SMT)

Input count: 1

Number of circuits: 1

RoHS: ROHS3 compliant (lead-free)

Base device: 74LVC1GU04

Low quiescent current: ~10 µA max (see datasheet for exact limits)

Balanced, high-current CMOS outputs

Wide logic compatibility across low-voltage systems

Key Advantages

Space saver: tiny 5-ball DSBGA fits the smallest designs

Flexible power: runs from 1.65 V up to 5.5 V systems

Fast switching: low delay for high-speed logic paths

Strong output drive: can fan out to multiple loads or drive LEDs (within current limits)

Unbuffered behavior: suitable for analog-style uses like RC oscillators, pulse shaping, and delay elements

Industrial-grade temperature range for harsh environments

Low static power consumption to extend battery life

Packaging

Type: 5-DSBGA (WLCSP/DSBGA style), Tape & Reel (TR) for automated SMT

Material: Wafer-level die with lead-free solder balls; no leadframe (chip-scale BGA)

Size: Approx. 1.4 mm x 0.9 mm footprint, ultra-low profile

Pin/ball configuration: 5 balls in a compact grid; 1 input, 1 output, VCC, GND, and one auxiliary/NC per device mapping (refer to datasheet for exact ball map)

Ball pitch: very fine pitch (typ. ~0.5 mm); confirm in datasheet for layout

Thermal characteristics: very low power dissipation; small package thermal resistance adequate for logic loads (no heatsink needed)

Electrical properties:

- Supply: 1.65 V to 5.5 V

- Logic type: Unbuffered inverter

- Output drive: ±32 mA

- Propagation delay: ~3 ns at 5 V, 50 pF

- Quiescent current: ~10 µA max (check datasheet)

- ESD: protected to JEDEC standards (see datasheet for HBM/CDM ratings)

Moisture sensitivity: typically MSL 1 (unlimited floor life); verify in datasheet

Reel format: Designed for high-volume pick-and-place

Lifecycle

Status: Active and widely supported by Texas Instruments

Not nearing discontinuation based on current industry data

Equivalent or alternative models (verify electrical differences before substitution):

- TI SN74LVC1G04 (buffered single inverter, similar supply range; use when buffered behavior is acceptable)

- TI SN74AUP1G04 (ultra-low-power single inverter; lower-voltage focus 0.8–3.6 V)

- TI SN74AHC1G04 (single inverter; best at 2–5 V with HC characteristics)

- TI SN74LVC1G14 (Schmitt-trigger inverter for noisy signals; different input behavior)

- Nexperia 74LVC1G04 (buffered single inverter; 1.65–5.5 V)

- onsemi NL17SZ04 (single inverter; low-voltage CMOS)

- Microchip MC74VHC1G04 (single inverter; VHC family)

- Diodes Inc. 74AHC1G04 or 74LVC1G04 variants (functionally similar buffered inverters)

Note: SN74LVC1GU04 is unbuffered; many alternatives are buffered. If your design relies on unbuffered characteristics (e.g., RC oscillator), select an unbuffered device or contact us for guidance.

If you need exact drop-in replacements in the same 5-DSBGA footprint, or if your application requires unbuffered behavior, please contact our sales team via our website for curated alternatives and footprint-matched options.

Key Application Areas

Signal inversion for microcontrollers, FPGAs, and logic interfaces

RC oscillators and simple analog timing/delay elements (unbuffered inverter is preferred)

Pulse shaping and edge conditioning

Level and polarity correction in mixed-voltage systems

LED drive and small load control (within ±32 mA limits)

Portable and battery-powered devices requiring low quiescent current

High-density boards where space is critical

Industrial and automotive-adjacent systems needing -40°C to +125°C operation

Datasheet

Y-IC hosts the most authoritative datasheet for SN74LVC1GU04YEPR on our product page. We strongly recommend downloading the datasheet here to confirm pin mapping, electrical limits, timing, and layout guidance.

Request for Quotation Now

Get a Quote on our website today for SN74LVC1GU04YEPR. Learn More and lock in pricing with our Limited Time Offer. Fast response, competitive pricing, and reliable delivery from Y-IC.